Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
14
2.2.
Configuration Tool
2.2.1.
Network Configuration
Figure 4. Configuration Tool (Network Config)
ⓐ
Version :
Displays firmware version.
ⓑ
Enable Serial Debug Mode :
If this mode is checked, you can monitor the status module
and socket message (listen OK, connect fail etc.) through serial terminal. If Debug mode is on,
debug message can cause abnormal operation of the serial device. Therefore, just use this
mode only for Debug mode.
ⓒ
Board List :
If you click “Search” button, all the MAC addresses on a same subnet, will be
displayed.
ⓓ
IP Configuration Method:
Select IP setting mode, you can select one of Static, DHCP,
PPPoE mode.
-
Static
: “Static” is option for setting WIZ100SR IP with static IP address. Firstly, select MAC
ⓙ
ⓖ
ⓕ
ⓐ
ⓑ
ⓒ
ⓓ
ⓔ
ⓗ
ⓜ
ⓛ
ⓚ
ⓘ
ⓝ
ⓞ
ⓟ
ⓠ