RS-232
3-pin pluggable connector for RS-232 command tranmission.
The RS-232 command will pass-through from transmitter to
receiver or receiver to transmitter.
5.2 Receiver Panel
SERVICE
IR IN
IR OUT
HDMI OUT
DC 24V
HDBT IN
AUDIO OUT
DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered supply by 24V/1A power adapter,
the other doesn’t need power supply.
HDMI output for display.
Name
Function description
Power LED
Red LED indicates when the receiver is powered.
SERVICE port
Firmware update port.
DC 24V
HDBT OUT
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
▪ Illuminate: Tra
nsmitter and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator
(on the right side of
the HDBT OUT port)
▪ Illuminate: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI OUT
AUDIO OUT
3.5mm stereo connector for analog audio output.
RJ45 connector for connecting the HDBT OUT port of
transmitter with CAT 5e/6 cable.
5 / 8
