WiXHC MK IV Series, Operator'S Manual

Page: 33 / 40

1. Tick to enable input ports
2.
The control card input port
3.
Low level active, tick to enable
Enable:
Pin Number
:
Active Lovw :
6.2.3 Output signals
Open Mach3 software ， select " Config " >> “ Ports and Pins ”
>> “ Output signals ”
1.
2.
The control card output port
3.
Low level active, tick to enable
Enable:
Pin Number
:
Active Lovw :
Tick to enable output ports
Basic parameters
30