manualshive.com logo in svg

Witura WT-9001 IP65, User Manual & Setting Instructions, Page: 24 / 29

Share
Download
Witura WT-9001 IP65 User Manual & Setting Instructions Download Page 24

 

 

24

WT-9001 IP65 GSM Remote Control And Alarm System 

WT-9001 IP65 – USER MANUAL – Rev.3.1 – Technical Support: 

[email protected] 

  

COPYRIGHT ©2008 WITURA CORPORATION SDN BHD 

 
 

It is possible to sound the alarm manually by sending the following SMS command to the 
unit, which remain active for the period of time set. 
 
Text Command: 

 

*ALNF#X 
 
X stands for ON (1) or OFF (0) value 

 

When *ALNF#1 is applied, means audible alarm will sound. 
When *ALNF#0 (Default) is applied, means audible alarm will turn off. 

 
 
 
To check the signal strength (0-31), you would send the following SMS command to the 
unit. 
 
Text Command: 
*CSQ?# 
 
 
 
 
It is possible to check the system is operating correctly by sending the following SMS 
command to the unit. 
 
Text Command: 
*TEST#        
 
When the unit replies TEST-OK indicate the unit is operating correctly. 
Note: If you receive no reply then unit is not working 
 
 
 
 
 
 
 
 
 

5.6.8  Sound The Audible Alarm Manually 

5.6.9  Checking Signal Strength 

5.6.10 Checking The System Is Operating Correctly 

Summary of Contents for WT-9001 IP65






























Reviews:

No comments