8
WT-218 GSM Car Alarm System
WT-218 – USER MANUAL – Rev.1 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
(a)
Check System Status
(i)
Under system armed status
Call the main unit by phone, enters into the main operation menu, and
selects “Check system status press 1”, according to condition that the car is
under, voice reports:
“Alarm system armed, door locked”
“Alarm system armed, door unlocked”
“Alarm system armed, door lock, engine disable”
(ii)
Under system disarmed status
Call the main unit by phone, enters into the main operation menu, and
selects “Check system status press 1”, according to condition that the car is
under, voice reports:
“Alarm system disarmed, door unlock”
“Alarm system disarmed, door unlock, car door open”
“Alarm system disarmed, door unlock, engine disable”
“Alarm system disarmed, door lock”
“Alarm system disarmed, door lock, car in running”
(b)
Monitoring
Call the main unit by phone, enters into operation main menu, selects “For
Monitoring press 2” to enter into monitoring mode, voice prompts “start
monitoring”. The limit time for monitoring is 5 minutes, if you want to keep
on monitoring, press any button within 5 minutes but except “0” and “3”,
then you can continue to monitor for another 5 minutes, otherwise 5
minutes later, and the call ends automatically.
During monitoring, press “0” back to the main menu.
During the monitoring, press “3” to start talking, meanwhile press “2” back
to monitoring again
(c)
Talking
Call the main unit by phone, enters into the main operation menu to press
“For talk press3”, voice prompts “Talk, please”, and then you can talk with
the person inside the car, 5 minutes later, overtime prompts “Du…”, press
any key except “0” and “2” to continue talking another five minutes,
otherwise five minutes later, voice prompts “Time is out, good bye” then the
call ends automatically.
During talking, press “0” to be back to the main menu.
