WittRock Integris 2001, Service Manual, Page: 300 / 302

7.6 Universal Holder (P2001)
Chapter 7: Accessories
7.6 Universal Holder (P2001)
Tools required: None.
Installation
Position the universal holder on the upper accessory track by loosening the
knobs and sliding it horizontally on the track.
1. Loosen the holder knobs (A), and set the universal holder (B) on the upper
accessory track (C) (see figure 7-6 on page 7-14).
Figure 7-6. Universal Holder
B
C
A
m148_055
2. Tighten the holder knobs (A).
3. Make certain the universal holder (B) is securely fastened on the upper
accessory track (C).
4. Slide the universal holder (B) horizontally on the upper accessory track (C)
until it is in the position that you prefer.
Page 7 - 14 Integris® 2001 Headwall System Service Manual (man148ra)