20.06.2011
Operating Instructions No. 9999-084-0
5
Operating Instructions
BlueCam
greendot
If a wrong code has been entered in step 4, the lock is blocked for another
30 seconds.
4 Opening after 4 wrong code entries
1.
After 4 wrong code entries the lock is blocked for 30
seconds. During this time it is not possible to enter a
code.
R
2.
At the end of the blocked time the red LED goes out
and a tone signal sounds several times.
3. Press the ON-button.
G
R
4. Enter a 4-digit user code within 10 seconds.
3 seconds
5. Turn the handle within 3 seconds and the lock opens.
G
5 Opening with the 1
st
master code
The 1
st
master code is only necessary if the lock is locked and the user code is not
known.
By entering the 1
st
master code the user code is deleted.
1.
Keep the ON-button pressed until the LED shines
permanently green.
G
2. Start to enter the 1
st
master code within 5 seconds.
10 seconds
3.
Turn the handle within 3 seconds. The lock opens
and the user code is deleted.
4. After the LED goes out, the lock is ready for use gain.
R