Wittke TWIN AUGER, Operator'S Manual

Page: 34 / 87

26 Safety
Cleanliness
Cleanliness is part of safety. Clean all the lights and safety decals so you and the surrounding
pedestrians and drivers will be aware of the truck at all times.
Locking Out and Tagging Out the Vehicle
For any inspection, repair or general maintenance being done on the vehicle, whether on the road or
at the shop, it is the employer’s responsibility to establish a proper lockout/tagout procedure and see
to the application of this procedure.
To lock out and tag out your W
ITTKE
T
WIN
A
UGER
™ vehicle:
1.
Park the vehicle on safe level ground, and apply the parking brake (see Figure 2-5).
Figure 2-5 Parking brake button
2.
Make sure the pod is empty.
3.
Switch OFF the hydraulic pump.
4.
Turn OFF the engine, remove the key from the ignition, store it in a safe and controlled area
(preferably on yourself), and tape over the ignition switch.
5.
Turn OFF and lock the master switch.
I
MPORTANT
:
The battery set of the W
ITTKE
T
WIN
A
UGER
™ is equipped with a master switch (see Figure 2-6) that
must be turned OFF.
Figure 2-6 Master switch