Wittke FEATHERWEIGHT, Maintenance Manual

Page: 13 / 171

Introduction
3
Figure 1 - 1 Monitor
N
OTE
:
Maintenance personnel as well as in-the-field technicians who encounter any problems with
the multiplexed system should refer to the Multiplex Diagnostic Manual (part# 153144_01) for
troubleshooting information and guidelines.
Service and Maintenance on the W
ITTKE
™
Maintenance on the W
ITTKE
™ is of paramount importance to ensure long-lasting durability of all its
moving parts as well as optimum performance in heavy work. Maintenance has to be done on almost
every system involved in the operation of the W
ITTKE
™, such as the hydraulic, electrical and
mechanical systems. Some parts are subjected to more wear and tear than others. Therefore, these
parts need regular maintenance and routine check-up to prevent signs of deterioration as soon as
possible.
N
OTE
: Any time you have a problem with a Labrie unit, you should contact your Labrie authorized
dealer first. They should be able to provide you with the proper help that you need, whether it
is for parts or technical service.
In this manual you will find the most common maintenance and inspection procedures required for
the W
ITTKE
™.
Parts
Labrie refuse vehicle parts are offered exclusively through Labrie Plus and Labrie Plus authorized
dealers. The quality and reliability of Labrie parts are second to none in the industry.
Warning
Your W
ITTKE
™ unit MUST BE COMPLETELY LUBRICATED before its first use. Refer to the lube
chart (see Figure 1 - 2) on the right side of the truck to know where the lubrication points are located
on the vehicle and how often the parts should be lubricated.