TK
+
ATEX
About this manual
Revision: 05
2022-D034859
en-3
1
About this manual
This operating manual contains necessary information to safely operate the gearbox.
If this manual is supplied with an amendment (e.g. for special applications), then the information in
the amendment is valid. Contradictory specifications in this manual thereby become void.
The operator must ensure that all persons assigned to install, operate, or maintain the gearbox have
read and understood these instructions in full.
Store these instructions within reach of the gearbox.
Inform colleagues who work in the area around the machine about the
safety and warning notices
to avoid injuries.
The original instructions were prepared in German; all other language versions are translations of
these instructions.
1.1
Information symbols and cross references
The following information symbols are used:
Indicates an action to be performed
Indicates the results of an action
Provides additional information about the action
A cross reference refers to the chapter number and the header of the target section (e. g. 2.3
"Intended use").
A cross reference on a table refers to the table number (e. g. Table "Tbl-15").
1.2
Scope of delivery
Check the completeness of the delivery against the delivery note.
Missing parts or damage must be notified immediately in writing to the carrier, the
insurance company, or
WITTENSTEIN alpha GmbH
.
