4
Reference Card Error Types (continued)
Error
Possible cause
Possible action
types
No display
or machine
not
operating
No
ingredient
Leak in
mixing
system
or
Mixing
system
overflows
Drip tray
full
Machine
does not
shut down
when drip
tray is full
Poor
flavour of
drink
Inadequate
quantity of
drink
Coins
sticking
Machine
dispenses
free drinks
Empty drip tray and dry sensor.
Check fuses outside of machine/power
cord.
Close door properly.
Refill canister.
Reinsert canister correctly.
Remove canister, clean auger drive
mechanism and reinsert. Open spout.
Reinstall and reconnect components.
Replace whipper seal.
Replace / clean blocked part/s.
Water tank and valves must be descaled
/ replaced.
Empty drip tray.
Clean mixing funnels
Clean sensor.
Use corrrect ingredients.
Place canisters in correct places.
Replace/clean clogged component/s.
Install hose of correct length.
Press coin return button.
Cf. manual of supplier.
Wait for 10 seconds.
Set correct price.
Switch off free vend.
Sensor in drip tray is wet.
No power.
Check if door is properly closed.
Canister empty.
Canister not correctly connected.
Ingredient sticking to auger drive
mechanism. Closed spout.
Mixing funnels/hoses not correctly
connected.
Whipper seal leaking or not installed.
Blockage in mixing funnels or
dispensing tubes.
Water dripping from hoses.
Drip tray full
Mixing funnels blocked
Foreign body clogging sensor
Wrong ingredients.
Canisters not located in their correct
places.
Ingredient residues clogging dispensing
outlet system.
Kink in outlet hose.
Coin mechanism sticking
Price set to 0.00.
Price set to free vend.
