Replacing the On/Off Micro Switch
1.
Unplug Neet Kleet shoe cleaner from the electrical outlet.
2.
Unscrew the switch from the handle assembly and pull out.
3.
Cut the wires from the old switch.
4.
Strip the wires about one inch and feed them through holes #3 and #4 of the new microswitch.
Twist and tape the wire leads on the new switch. Twist the switch counter clockwise 4 or 5 times
then screw the switch back into the handle assembly. Twisting the wires counter clockwise will
keep them from kinking when you screw the new switch clockwise back in the handle assembly.
