Witt 61650038, User Manual

Page: 19 / 72

19
Troubleshooting
Problem Cause Solution
“ADD WATER” indicator
turns on 1. Low water level or lack of
water.
2. The water screen at the
bottom of water reservoir
is blocked.
3. Pump malfunction.
1. Stop making ice, refill
water and then press
“ON/OFF” key to restart
ice-making cycle.
2. Do cleaning
3. Send it to the authorized
department for repair.
“ICE FULL” indicator lights
up 1. Ice basket is full and the
infrared light is blocked by
the ice.
2. Infrared light-emitting dio-
de & light-receiving diode
do not work.
1. Remove the ice from ice
basket.
2a. Wipe up the foreign
objects on the infrared
light-emitting diode &
light-receiving diode and
restart the ice maker.
2b. Call Customer Service if
the infrared light-emitting
diode & light-receiving
diode still can not work
after wiping up the
foreign objects on them
and restarting the ice
maker.
“ADD WATER” and “ICE
FULL” indicators turn on
simultaneously 1. The ice tray is not in the
right position.
2. The “ICE FULL” condition
can not be detected as
the infrared light module is
interfered by the sunlight.
1. Unplug the appliance and
check if the ice tray is
blocked by something.
2. Unplug the appliance
and move it to a place
which is not exposed to
the sunlight, then plug the
appliance and activate it
again.
The ice collects together.
Making ice takes too much
time. Stop making ice and restart
the ice-making cycle after
the ice melts.
The water in the water
reservoir is of too low tempe-
rature. Fill the water reservoir with
water ranges between 8 ºC
and 25 ºC.
The ice-making cycle
seems normal but no ice is
produced.
The ambient temperature
or water temperature is too
high. Start the ice-making cycle
at a environment with an
ambient temperature less
than 32 ºC and fill the water
reservoir with some cold
water.
Refrigerating system leaks. Call customer service
Refrigerating system blocks. Call customer service
EN EN