Witt 24310030 Instructions For The Use - Installation Advices Download Page 16 | Manualshive

Page: 16 / 52

background image

16

16

ELECTRICAL SECTION

3

IMPORTANT: This appliance is to be installed only by an authorised person

according to the current local regulations and in observation of the manufacturer’s

instructions.

Incorrect installation, for which the manufacturer accepts no responsibility, may

cause damage to persons, animals and things.

Before effecting any intervention on the electrical parts of the appliance, the

connection to the network must be interrupted.
The connection of the appliance to earth is mandatory.

The manufacturer declines all responsability for any inconvenience resulting from

the inobservance of this condition.

If you note a crack in the cooktop, switch the appliance off immediately and call

the After-Sales Service.

GENERAL

•

Connection to the mains must be carried out by qualified personnel in accordance

with current regulations.

•

The appliance must be connected to the mains checking that the voltage

corresponds to the value given in the rating plate and that the electrical cable

sections can withstand the load specified on the plate.

•

The cooker can be connected directly to the mains placing an omnipolar switch with

minimum opening between the contacts of 3 mm between the appliance and the

mains.

•

The power supply cable must not touch any hot parts and must be positioned so that

it does not exceed 75°C at any point.

•

Once the cooker has been installed, the switch must always be accessible.

N.B. For connection to the mains, do not use adapters, reducers or branching

devices as they can cause overheating and burning.

If the installation requires alterations to the domestic electrical system, call an expert.
He should also check that the domestic electrical system is suitable for the power

absorbed by the appliance.

«
...
14
15
16
17
18
...
»

Summary of Contents for 24310030





















































Reviews:

No comments

Related manuals for 24310030

Brand: Zline Pages: 29

Brand: VALERA Pages: 2

Brand: Lakeland Pages: 5

Brand: K&H Pages: 12

Brand: PITT Pages: 2

Brand: Oster Pages: 30

Brand: GE Pages: 72

Brand: TECHWOOD Pages: 9

Brand: Esse Pages: 16

Brand: Gaggenau Pages: 40

Brand: UNITED Pages: 5

VGRT302-4B Series

Brand: Viking Pages: 5

Brand: Sammic Pages: 68

Brand: Parmco Pages: 27

Brand: Parkinson Cowan Pages: 44

Brand: Electrolux Pages: 36

Brand: Electrolux Pages: 30

Brand: Electrolux Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands