6.2 Monitoring the measured results
Fig. 26: Diagram display mode
In the diagram display mode, the rate deviation and the beat error
(repère) are shown in diagram form (Fig. 26/6).
Rate (Fig. 26/1), beat error (repère) (Fig. 26/2) and amplitude
(Fig. 26/3) are illustrated numerically.
The flashing rectangles (Fig. 26/4) show that a measured value is
being received. The letters below indicate the test position of the
microphone.
In order to better recognise irregularities, the diagram can be
enlarged using the zoom function (Fig. 26/5).
The 6 position windows (Fig. 26/7) show the diagram in the respec-
tive measuring position. If the measuring procedure is stopped, the
measured values and the diagram can be shown in the large dis-
play by tapping the small position windows.
Printing measured results/generating screen-
shots
For the purposes of evaluating the measured
values, the current view can be printed or a
Diagram display mode
Performing a measurement
Monitoring the measured results
27.02.2018
Precision measuring device Watch ...
47
