background image

Safety

This section provides an overview of all the important safety

aspects that ensure personal protection and safe and trouble-

free operation of the device. There are additional, task-specific

warnings in the sections on the individual life cycle phases.

2.1  Symbols in this document

Safety information and warnings are identified by symbols in

this document. The safety information and warnings are intro-

duced by signal words that indicate the extent of the hazard.

NOTICE!
This combination of symbol and signal word

indicates a potentially hazardous situation that

can entail material damage if not avoided.

ENVIRONMENT!
This combination of symbol and signal word

indicates possible hazards to the environment.

This symbol draws your attention to useful tips

and recommendations and to information that

helps ensure efficient and trouble-free opera-

tion.

The following labels are used in this document to draw atten-

tion to instructions, results, lists, references and other ele-

ments:

Label

Explanation

1., 2., 3. ...

Step-by-step instructions

ð

Results of actions

References to sections of this document

and other applicable documents

Lists without a fixed order

Safety indications and warnings

Tips and recommendations

Additional labels

 

  

 

24.03.2021

Precision measuring device ChronoMaster / ChronoMaster Air

16

Summary of Contents for ChronoMaster



















































Reviews: