![background image](http://html1.mh-extra.com/html/witschi/analyzer-q1/analyzer-q1_instruction-manual_990040011.webp)
Witschi Electronic Ltd
Analyzer Q1
Page 11
Automatic Selection
In automatic test mode (selected in
System parameters
menu) the measurement functions
Rate and
consumption test,
Battery test
and
Mechanical watch test
are automatically selected as soon as the
instrument receives an exploitable watch signal. In this way, the measurements that are most often
carried out can be performed without accessing the instrument at all.
If the signal is no longer available, the measurement function that has been automatically selected
remains active for a few seconds before the instrument jumps back to the main menu.
Manual Selection
The measurement functions
Resistance (coil) test, Graph of the motor pulse
and
Signal generator
must be manually selected.
The other functions that can be automatically selected can also be manually selected (e.g. for batch
testing).
A manually selected function remains active until a jump back to the main menu has occurred (also
when no signal is available).
Place the
arrow (on the right-hand side of the display) on the desired function by rotating the
knob. Then press the rotary knob for activating the function.
When a function has been selected, the cursor jumps to the parameter line of the selected
measurement function.
To return to the main menu, place the cursor on the
Back
arrow
by rotating the knob, and then
press it. You can also keep the rotary knob pressed until the instrument jumps directly to the main
menu.
5.3
Parameter Settings
The cursor jumps to the parameter line after a function has been activated. The parameters differ
according to the function.
After a measurement function has been selected, all parameters are set to the most commonly
preferred values. Modified parameters are reset to the preferred values when the measurement
function is exited.