Two ChronoMaster software versions are available:
•
ChronoMaster
•
ChronoMaster PRO
The
“Witschi Token Installer”
software can be used to install a
token on the device to extend the device to the PRO version.
Ordering the token
The token is created exactly for the device to be
extended. The token contains the item number
and the serial number of the device.
For further information, see the software
manual.
Using what is called a demo token, you can test the PRO ver-
sion for a certain time. The demo token has a timestamp and
can only be installed once on the device. If new functions are
provided by the manufacturer, a new demo token can be cre-
ated, which can be installed again once.
A USB cable is used to connect the ChronoMaster to the PC or
tablet computer. The measurements are controlled using the
corresponding
“Chronoscope Service”
display software.
In the
“Chronoscope Service”
display software, you can
choose between the
“Diagram”
and
“Vario”
display modes
for both versions. In addition, the
“Trace”
,
“Sequence”
,
“Polar”
,
“Scope 1”
and
“Scope 2”
display modes are
included for the ChronoMaster PRO version.
Information on controlling the measurements
Further information on controlling the measure-
ments is to be found under
measurement” on page 21 and in the corre-
sponding software manual.
Versions
Controlling the measurements
01.09.2020
Precision measuring device ChronoMaster
7
