3.4 Connecting the ChronoMaster
Personnel:
• Operator
Requirement:
•
The
“Chronoscope Service”
display software is installed on
the PC or tablet computer.
1.
Start the
“Chronoscope Service”
display software on the
PC or tablet computer.
2.
Plug the USB plug of the USB cable (Fig. 6/1) into the
USB port of the PC or tablet computer (Fig. 6/2).
Fig. 6: Connecting the ChronoMaster
ð
•
The ChronoMaster is connected to the PC or tablet
computer.
•
The ChronoMaster is identified by the display soft-
ware and executed there (Fig. 7).
Fig. 7: ChronoMaster identified by the display software
Fig. 5: Starting “Chronoscope
Service”
01.09.2020
Precision measuring device ChronoMaster
20
