P5 integrated information menu:
Ok key:
Short press: switch 6 sets of
capacity data
Long press: quickly clear the
current capacity group data
(u2p long press ok to switch
the temperature interface)
m
key:
Short press: cut screen
Long press: switch
Serial port: off means the serial port data
transmission function is off.
On: Open
group: 1/6 indicates the current record data group
Current threshold: After the offline curve function is turned on, the
data will be recorded when the current value is exceeded. For
example, the charging capacity of the mobile phone is recorded.
The current current threshold is set to 50 mA. Because the mobile
phone is fully charged, the charger still has a certain current output.
There may be a few milliamps
~ One or two hundred milliamps, so you must set a threshold.
Below this value, you think that the phone is fully charged and no
longer record data, otherwise the recorded capacity will be
inaccurate.
Record the charging status of other devices, which can be set to 0 or
other values according to the actual situation.
Ah: Current recording capacity of the record group Wh: watt-
hour capacity recording time of the current recording group:
valid statistical data time of the current recording group
(automatic memory accumulation) Power-on time: U2 power-
on time (power-off is not saved) Offline curve recording
capacity: Displays
the percentage of the remaining recording
space. Green bar: The offline recording
function is enabled.
Display remaining recording capacity (space red already used,
18
/
44
Summary of Contents for Qway U2
Page 23: ...23 44...
