(Non-pps charger is gray and not optional)
At this time, the blue selection box is in the mode of selecting
the voltage position at the top. If the middle pps position is
selected, the fifth position of the above figure is selected.
3.30-
11.0V 2.00A
(meaning that the voltage can be adjusted from 3.3 to 11v) Then press
the OK button and switch to the
±
1V or
±
20mV option to adjust the
PPS voltage.
Remarks: Some charging heads broadcast a range of voltages that
may differ from the actual ones.
39
/
44
Summary of Contents for Qway U2
Page 23: ...23 44...
