Withings ScanWatch Series, Installation And Operating Instructions Manual

Page: 36 / 104

EN - 36
ScanWatch
v1.0 | August, 2020
Important note - Do not disturb mode :
You can choose to activate/deactivate notifications directly on your ScanWatch.
To do so, press the side button and scroll to the
Settings
menu. Press the button
to select the Settings menu and scroll to the Do not disturb screen. Press the
button so that OFF is displayed on the screen. The notifications have been
activated.
If you deactivated the notifications screen on your ScanWatch, you won’t receive
notifications anymore on your watch. However, all third-party apps will still be
activated in the Health Mate app.
If you want to reactivate notifications, press the button again so that
ON is
displayed on the screen.
Note that high/low heart rate and irregular heartbeat notifications won’t be
deactivated if the Do not disturb mode is on .
Activating the Do not disturb mode
You can choose to deactivate notifications directly on your ScanWatch. To do so,
press the side button and scroll to the
Settings
menu. Press the button to select
the Settings menu and scroll to the Do not disturb screen. Press the button so
that
OFF
is displayed on the screen. The notifications have been deactivated.
If you deactivated the notifications screen on your ScanWatch, you won’t receive
notifications anymore on your watch. However, all third-party apps will still be
activated in the Health Mate app.
If you want to reactivate notifications, press the button again so that ON is
displayed on the screen.
Note that high/low heart rate and irregular heartbeat notifications won’t be
deactivated if the Do not disturb mode is on
.
Activating the Shortcut
The Shortcut is a time-saving feature that creates a shortcut to the measure of
your choice. You can launch a workout, or record your ECG in one easy step.
The Shortcut can be activated or deactivated in your Health Mate app. To do so,
go to the
Devices
tab and tap
All settings
. Tap
Long-press shortcut
and then
enable the long-press shortcut. Now pick the feature you want to launch with the
long-press.
Once activated, simply press and hold the side button of the watch to start the
selected measurement at any time.