1
7
(3) Optical input
You will need: An audio source with an Optical Audio Output and a Digital Optical Audio Cable
(not included)
1. Connect the Digital Optical Audio Cable to the optical output on the audio source and to the Optical Input
on the speaker.
2. Press the Power button on the unit, or standby button on the remote, to power on the unit.
3. Press the Source button repeatedly, or mode button on the remote to enter Optical mode indicated by
orange LED in the top right corner of the speaker.
4. Audio played through the connected device will now be heard through the speakers.
5. Using the native controls on your connected device, make sure the audio settings are set to PCM or
Optical Audio.
6. Audio from the connected audio source will now be played through the speakers.
