www.witeg.de
witeg Labortechnik GmbH, WIR Low temperature Incubator
15
Do not use the device near highly combustible materials.
Do not set the device outdoors.
It is superiorly to set the device in a good illuminated place to avoid accidents engendered
by handling errors.
To set the device in wet or dusty places could cause overheating, short circuits or fires.
Do not use this device in area with potentially explosive atmosphere.
3 Positioning the device and commissioning
1. Follow especially the safety instructions marked with following symbol:
2. Remove the package carefully.
3. If there are any unexpected transport damages, please inform your forwarder and your
customer service.
4. Before you connect the device with the electrical outlet, please let some time laps until
the device is acclimatised.
5. Make sure that you follow all safety instructions.
6. Connect the device with the power outlet.
7. Switch the device on.
8. Set your values and start the process (look at job description).
4 Product description
4.1 Key features
The
W
isd
WIR Low Temperature Incubator
ensures a constant temperature which makes
it suitable for microorganism culture, germination and animal and plant cell culture from 0°C up
to 60 °C. The device was developed for simplest usage and a very long life.
Key features are as follows:
Simplest control by Jog-Dial knob.
Fast commissioning.
Long life by simply and solid construction.
Time and temperature showed on illuminated LCD.
Storage function for adjusted time and temperature values.
Turn-off and turn-on delay from one minute up to over 99 hours.
Signal sound after end of delay time.
Easy to justify.
Key lock against inadvertent changing of set temperature and time values.
Height-adjustable teflon-coated steel shelves included.
Over temperature an over current protection.
Inner room made o stainless steel.
Glass door for process viewing without interruption.
