Operating instrutions
WITA U 25 | U 35 | U 55 | U 75
26
8
Installation
Install the device with the power supply disconnected and with the pump motor lying horizon-
tally (the arrow on the pump housing shows the direction of flow) (Fig. 1).
When performing insulation work, ensure that the pump motor and the electronics housing are
not covered in insulation. If the installation location changes, you must rotate the motor housing
as follows:
• Unscrew the socket screw
• Rotate the motor housing
• Re-insert the socket screw and tighten.
Fig. 1
Summary of Contents for U 25
Page 30: ...Notizen Notes 30...
Page 31: ...Notizen Notes 31...
