WITA SM W 05 FR, Installation Manual

Page: 39 / 64

WITA Fixed setpoint controller SM WR FR
39
Operating instrutions
8 Commissioning of the fixed setpoint
controller SM WR FR
When the fixed setpoint controller is first connected to the network, the type of
the controller, the program version and the LOGO are shown on the display.
The display then switches to the basic display.
The basic display is shows the factory setting during the first commissioning,
then the last set values and settings.
In order to make new settings in the fixed setpoint controller,
the manual adjustment knob must be disassembled so that
the setting buttons are accessible. By simultaneously
pushing the button 5s,
the display switches to selection mode, where an adjustment
can be made to the existing system. (See process)
Mit Confirmation of the display will save the settings.
Basic display
Basic display
Cooling
selection valve
direction of
rotation
flow control
selection
heating / cooling
max. temperature
heating
min. temperature
heating
selection valve
direction of rotation
selection
hydraulic scheme
setting tempe-
rature heating