Display HE Pumpen
Operating instruction
WITA Delta HE 75-XX | 100-XX | 120-XX
• Prevent hazards arising from electrical energy.
• Observe the instructions in local or general regulations
(e.g. IEC, VDE, etc.), and those of the local energy supplier.
• In the event of hazards arising from the system due to con-
tact with hot or cold parts, these parts must be fitted with a
touch guard.
• Keep flammable substances away from the product.
2.7 Safety instructions for installation and maintenance work
The system operator is responsible for ensuring that all installa-
tion and maintenance work is carried out by qualified personnel.
These persons must also have familiarised themselves in ad-
vance with the product using the operating instructions. Con-
ducting work on the pump is only permitted when the system is
shut down.
Ensure that the device is securely disconnected from the power
supply. Disconnect the device plug to achieve this. Prescribed
instructions for shutting down the device can be found in the
operating instructions. All protective mechanisms, such as a
touch guard, must be correctly reattached after work.
2.8 Unauthorised conversion and production of spare parts
Modification or conversion of the product is only permitted after
prior consultation with the manufacturer. Only use original spare
parts for repairs. Only use accessories that have been approved
by the manufacturer. The manufacturer shall bear no liability for
any consequences resulting from the use of other parts.
27
Summary of Contents for Delta HE 100 Series
Page 42: ...42 Notes...
Page 43: ...Display HE Pumpen 43 Notes...
