WisyCom RTE25, User Manual

Page: 4 / 12

3
F
RONT
P
ANEL
C
ONTROL AND
F
UNCTIONS
❶ ❷ ❸ ❹ ❺ ❽ ❾ ❿
❻ ❼
❶
ON/OFF SWITCH (with LED indication).
❷
SELECTOR: CHANNELS (with back-light).
❸
GAIN LOCK (turn on the right to lock the gain).
❹
ADJUSTMENT: AUDIO INPUT SENSITIVITY (GAIN).
With the optimum sensitivity adjustment, the red LED [5] can flash under modulation peaks.
The full ccw position corresponds to 0 dB input level (with
Line / Mic switch [7] on Line position).
❺
LED INDICATION: LIMITER-ON STATUS (red LED).
❻
LED-BAR: DEVIATION.
The LED-bar indicates the deviation in ± kHz and in ± dB referred to ± 20 kHz deviation.
❼
SWITCH: AUDIO INPUT LEVEL ( Line / Mic ).
If the switch is on Line position a red light is ON.
❽ CONNECTOR: FRONT-PANEL AUDIO INPUT (XLR3-F type).

pin 1 = ground

pin 2 = AF-a

pin 3 = AF-b
The audio input is transformer balanced and floating.
The connector is selectable by front panel switch on “FRONT” position.
❾
SWITCH: AUDIO INPUT ( Front / Rear )
If the switch is on Rear position a red light is ON.
❿
CONNECTOR: RF OUTPUT (N-F type).