WisyCom MTB40S, User Manual, Page: 4 / 24

MTB40S User Manual
4
L
ED INDICATION
The front led is a RGB indicator ( red , green , blue ) which shows the following status of the
transmitter:
- Wireless transmission status: green when RF transmission power is on (on power on the
device, this LED is red and become green when the RF transmission power is on).
- Battery status: green steady, slowly blinking (< 25%), quickly blinking (<12%).
-
Modulation peek (if activated): red .
- Limiter in action (if activated): blue .
B
ATTERIES
MTB40S is working with 2 AA alkaline, NiMH or Lithium batteries (select correct type on setup
controls). Battery status can be checked on internal OLED display or looking to LED status on front.
BATTERY SUBSTITUTION

Open transmitter cover and insert batteries.
Attention: always replace both the batteries
O
PERATING CONTROL
❶
Shotgun Microphone input, XLR-3F socket (balanced)
❷ OLED display
❸
OFF button
❹ ON/SEL button
❺
DOWN button
❻
UP button
❼ LED indicator
❽
CH/GAIN button
❾ Battery compartment cover
❶
❸
❹
❺
❻
❼
❽
❾ ❷