MRK980 User Manual
rev.01
9
C
–
Word Clock I/O
D
–
Remote control module:
redundant Dante connectors and redundant
Ethernet connectors
E
–
AES3 Digital output
F
–
Receiver 1 and Receiver 2 Audio outputs
: Main, Aux and TRS
G
–
Antenna BNC I/O (lower part) and optional boards slot (upper
part)
MAIN MENU
To access the receiver main menu and the sub menus
press the “ENTER”
button (
A
) or rotary knob (
B
).
Use the “EXIT” button to exit the sub menus.
Keep pressed
“ENTER” or the rotary knob
pressed to confirm your selection.
Scroll around the menu by using the rotary knob.
Presets
Use this to load or save presets to device. These presets include all the config.
Settings. You can also restore factory settings here. Press and hold ‘enter’
button to save setting.
Receiver IF Bandwidth
Here you can select either ‘wide’ (200kHz channel) or ‘narrow’ (100kHz
channel). Make sure you are using the correct setting. If you are using with a
standard Wisycom TX or a pack from another manufacturer (Sennheiser, Shure
etc) then set to
‘wide’
. For use with the Wisycom narrow band TX (these have
the letters ‘NB’ in the manufacturer’s part number) this should be set to
‘Narrow’
. N.b. Narrow band mode offers double the number of channels in a
given slice of spectrum. Narrow band also increases the receiver sensitivity by
3dB, equivalent to doubling the TX power.