MPR50-IEM User Manual
Rev. 01
25
How to load/save channels memory
Write:
Push the button
Write
from WDF file…
and select the wdf file to load on the MPR50.
Read and save:
Push the button
Read and save to WDF file…
, insert the .wdf file name and the path where to
save the wdf file.
During the process of writing/reading & saving, a green bar below the panel shows the
progress of the process and on the information panel it is possible to verify what the
application is doing.
To
Modify
the wdf file, it is possible to use the spreadsheet
FREQUENCY 2010 v16.xls
available
on the website:
- open the file and enable changes and macro
- load the wdf file clicking on READ WDF button
- execute the desiderate changes
- save the wdf file clicking on SAVE WDF button
The WDF thus modified can be used to write on the MPR50’s channels memory.
How to upgrade the firmware
Select
FW upgrade
panel
1.
Push the
Browse
button and select the upk file
2.
Put the receiver in bootloader
mode: power on the MPR50
keep pushing both the arrow
buttons). When the receiver is
in bootloader mode, all the led
in the front panel are turn on.
3.
Click on Start button and check
the progress of the upgrade
process in the green bar