23
“Auto” allows the use of 802.11a mode.
Ad Hoc Net Start:
Specifies a band to establish an Ad Hoc network if no
matching SSID is found. Four options are available: 802.11a, 802.11aTurbo.
Scan Mode:
Options are
Active Scan
,
Passive Scan
and
Auto
. In Active
Scan, the driver sends out the probe request frames from each channel and
collects the response frames from the responding. In Passive Scan, the
driver scan each requested channel, listening the beacons on each channel.
Transmit Power:
This setting allows you to change the output power of the
PC Card to increase or decrease the coverage area.
QoS:
Disables or enables the PC Card to cooperate in a network using QoS
(Quality of Service).
