23
“Super A”, “Super G” or “Auto”. “Auto” allows the use of either 802.11a,
802.11g or 802.11b mode.
Ad Hoc Net Start:
Specifies a band to establish an Ad Hoc network if no
matching SSID is found. Four options are available: 802.11b, 802.11a,
802.11aTurbo and 802.11g.
802.11b Range:
Options are
Normal Range
and
Extended Range
. This
function can let user to determine the transfer range in 802.11b mode.
Extended Range can prolong the transfer range with a lower data
transmitting rate.
Scan Mode:
Options are
Active Scan
,
Passive Scan
and
Auto
. In Active
Scan, the driver sends out the probe request frames from each channel and
collects the response frames from the responding. In Passive Scan, the
driver scan each requested channel, listening the beacons on each channel.
Transmit Power:
This setting allows you to change the output power of the
PC Card to increase or decrease the coverage area.
QoS:
Disables or enables the PC Card to cooperate in a network using QoS
(Quality of Service).
Country:
Select the country where this PC Card will operate.
ALERT!
Different countries have different regulations that affect which
channels can be used. You should always choose the country where you are
physically located to avoid using an illegal channel.
2.4 GHz Preamble:
Allows Ad-Hoc compatibility with other 2.4 GHz
devices. Two options are
Short and Long
and
Long only
. Use
Long Only
when configuring the client for an 802.11b RoamAbout AP wireless
network.
