Network Video Recorder User Manual
53
To schedule an all-day recording, check the checkbox after the All Day item.
Edit Schedule
To arrange other schedule, leave the All Day checkbox blank and set the
Start/End time.
Up to 8 periods can be configured for each day. And the time periods cannot be
overlapped each other.
Select the record type in the dropdown list.
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm)
and VCA (Video Content Analysis) triggered recording and capture, you must
configure the motion detection settings, alarm input settings or VCA settings
as well. For detailed information, refer to Chapter 7.1 , Chapter 7.2 and
Chapter 4.5 .
The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording for other days in the
week. You can click Copy to enter the Copy to interface to copy the schedule settings
to other days
Click Apply in the Record Schedule interface to save the settings.
Draw the Schedule
Click on the color icons, you can choose the schedule type as continuous or event.
