wooden, you can use self
-
tapping screws to secure
the camera.
⚫
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
Installation of Type I Camera
Steps:
1.
Attach the dill template to the ceiling.
2.
Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
47.6
1
3
.7
2
7
.5
Φ
6
8
3-
Φ
4
Unit
：
mm
Figure 2. 1
Drill Template
Note:
Cable hole is required when adopting ceiling outlet to
route the cable.
3.
Attach the mounting base of the type I camera to
the ceiling and secure the camera with supplied
screws.
Figure 2. 2
Secure
the camera to the ceiling
Note:
⚫
In the supplied screw package, both self-tapping
screws and expansion blots are contained.
⚫
If the wall is cement, expansion blots are required
to fix the camera. If the wall is wooden,
self-tapping screws are required.
4.
Route the cables through the cable hole (optional),
or the side opening.
5.
Connect the corresponding power cord and video
cable.
6.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle.
If not, adjust the camera according to the figure
below to get an optimum angle.
