WISKA CH EX 260 M Series, Operating Instructions Manual, Page: 4 / 14

BA CH EX 260-IECEx-eng Rev2.18.01.2019
4
2.2 Safety instructions
Only use the camera for its approved intended purpose. Ensure that the
maximum temperature range (Ta) is not exceeded during installation and
operation.
Incorrect or improper use or non-compliance with the information in these
operating instructions invalidates its warranty.
Changes and alterations to the camera that adversely affect the explosion
protection are not permitted. The cable- and line inlet as well as the screw
plugs may not be altered.
The camera may only be operated in an undamaged and clean condition.
The responsibility in respect of proper use of these plug devices with
reference to the basic conditions existing in the plant lies with the operator
alone.
2.3 Conformity to standards
The camera conforms to the following regulations and standards:
- Directive 2014/34/EU
- IEC 60079-0:2017
- IEC 60079-1:2014
- IEC 60079-31:2013
- EN 60079-0:2012+A11:2011
- EN 60079-1:2014
- EN 60079-31:2014
The CH EX 260 type camera is certified for use in explosive areas in zones 1,
21, 2 and 22.
We will provide a copy of the EU Type-Test Certificate with the relevant
annex on request.