Wisi VX 24, Operating Instructions Manual

Page: 8 / 8

- 8 -
Connection
Plug the handset into socket "RJ-11". Connect the supply voltage.
Parameter menu
 keys — Select parameter.
 key — Open parameter sub-menu.

key — Back.
Parameter sub-menu
 
keys — Select display or value to be changed.
Cursor stands under the value, e.g. 89
 keys — Change the value.
Left Right
Down
Up
W
I SI VX24
1. 00 V
Parameter settings with handset (Accessory)
Operation steps Display/sub-menu Settings
Downstream Downstream
Select with

keys and confirm with

.
Upstream Upstream Upstream menu is available only if
Sys. Settings Sys. Settings
VX 27A is plugged in.
An asterisk
(*) in the settings shows that a setting has been changed.
Downstream
Input Equalizer Input Equalizer 0 dB... 15 dB. 0,5 dB steps.
Input Attenuator Input Attenuator 0 dB... 15 dB. 0,5 dB steps.
Interstage Attenuator Interstage Att.
0 / 5 dB
Interstage slope Interstage slope 0 / 7 dB
Upstream
Up. Attenuation Up. Attenuation
0 dB... 30 dB. 1 dB steps.
Up attenuation <4 dB adjustable, when Interstage slope or Interstage -Att. are set in downstream menu.
Up. Slope Up. Slope 0 dB... 10 dB. 0,5 dB steps.
Ingress Controll ICS
Up. ICS
Switch Low 0 dB
Pad 8 dB
High >45 dB (off)
Sys. Settings
The parameters of an VX 2...which has been set can be saved to the memory of the handset OK 41A and
transferred from there to other VX 2... systems.
Settings
Select: Save or Restore, Yes or No
– Save Save Val. > OK41A yes, save – no, not save
– Restore Res. Val. < OK41A
yes, restore – no, not restore
Savings
Save
Save data to EEPROM Press  several times until the display shows:
"Save Data to EEPROM“.
07.06