- 20 -
GB
Channel
22
25
29
24
Overlapping
Single channel mode
Note:
Setting the "Start channel" (example ch 33)
also sets the "Stop channel" autom. to ch 33.
Switching off a cluster
- Select "Start" channel and set to OFF.
The "Stop" channel"is set autom. to OFF.
Overlapping cluster
-
*
The digit displays overlapping.
5. Attenuator
- Set the attenuator 0-30 dB for each cluster.
Setting cluster inputs
The 3 UHF inputs of the amplifier are splitted
into 10 clusters.
The input can only be configured for
cluster 8, 9, and 10.
Select the "Parameter-Submenu" and
configure the inputs.
Note:
Cluster 1 and 2 are assigned to UHF 1.
Cluster3, 4, 5, 6 and 7 are assigned to UHF 2
Cluster 8, 9 and 10 are assigned to UHF 2 or 3.
Each cluster can be set to OFF. For example:
only one cluster is needed for UHF 2,
switch OFF the other clusters.
UHF 1
UHF 2
UHF 3
2
8
0
2
7
1
2
5
3
Start Chan . CL.8
Stop Chan
Attenuator
Select Input
Stop Chan . CL.8
Channel 52-54
Start Chan . CL.8
Channel 52
Attenuator CL.8
30 dB
Select Input
UHF3: Cluster 10
