Factory settings
Input frequency
= 1237 MHz
Symbol rate
= 27500
Program
= Das Erste
Languag
= deu
Subtitle 1
= off
Subtitle 2
= off
Subpage
= 0
F-Out
= 471,25 MHz
Out-Att
= 0 dB
OutConf
= loop
VidNorm
= PAL
Picture
= 4:3
TV-Std
= B/G
SCRatio
= 13 dB
A-Mode (OV 76) = mono
A-Mode (OV 76S) = stereo
A-Att
= + 0 dB
TP-Gen
= off
Pid's
= disable
Mod-No
= 0
Teletext page
Subpage
000...999
Teletext page is enabled.
0
off
Output frequency
F-Out
471,25 MHz
250 kHz steps
45-862 MHz
Attenuation
Out-Att
0 dB
Output signal attenuation.
0...10 dB
Output configuration
OutConf
loop
Looped-through mode.
loop / single
single
Single output.
Decoder
Decoder
Off
Factory settings.
Nicam
Inserting a Nicam signal. 2nd Sc off.
Mono
2nd sound carrier (2nd Sc) off
Stereo
Mode Stereo
Dual
Mode Dual
At Mono, Stereo and Dual mode — insert of
external AV signals
Videonorm
VidNorm
PAL
PAL, SECAM, NTSC-M video norm.
Screen format
Picture
4:3
16:9 setting: format is shown as letterbox
4:3 / 16:9
16:9
4:3 setting: none action.
16:9 setting: This setting is shown in full
screen format.
TV standard
TV-Std
B/G, D/K, I, L, M, N
Sound carrier ratio
SCRatio
11-18 dB
Audio mode (OV 77)
A-Mode
Mono
(R + L) / 2
Mono-L
Left channel
Mono-R
Right channel
Audio mode (OV 77S)
A-Mode
Stereo
Mode: Stereo
Dual
Mode: Dual
Auto-A
Header information
Auto-V
VPS information.
Mono
Dual mode: switched off
Mono-L
Mode: Dual
Mono-R
Mode: Dual
Test pattern generator
TP-Gen
off
Color
Color test pattern
B/W
b/w test pattern
Auto
Poor signal quality, b/w test pattern is
autom. displayed
1)
Pid's
1)
Pid's
enable
Pid informations are enabled.
disable
Pid informations are disabled.
Modul number
Mod-No
1...10
Local mode
Controlling via OV 51 or OV 52.
Version
Version
1.00
Displays the device number and the MPEG
decoder version.
Select the menu item and adjust the values in a menu line with the UP/DOWN keys
ST
.
Enter values and enter and exit from menu lines with the LEFT/RIGHT keys
W X
.
Saving: Data are saved automatically. Data are retained in the case of a power failure.
Operation
Operation
Display
Settings
Input frequency
Sat-IF
1237 MHz
Move cursor with L/R keys to digit to be
950-2150 MHz
1 MHz steps
changed and adjusted with UP/DOWN keys.
Symbol rate
SymRate
27500 MS/s
Adjust with UP/DOWN keys.
2000...45000 MS/s
B
it
E
rror
R
ate
BerRate
<1.0 e-4
The BER is an indication of the number
is displayed, but
of transmission errors and thus of the
cannot be changed
signal quality.
<1.0 e-4
= very low numbers of errors
1.0 e-3
= low number of errors
1.0 e-2
= threshold for display:
Signal?
Selection of program
Program
Das Erste
Shows the content of the programme
package. You can select
one programme
from this package. The programme parameters
like Video-PID, PCR-PID, Audio-PID and Teletext
are transferred automatically.
*
Vid-Pid
1)
Setting the operation mode:
Pid's enable
the Pid's like Sid, Vid, PCR are displayed.
Setting
Pid's disable
they are not displayed.
Language
2)
Languag
deu
Some programmes are transmitted in
ita
several languages. In such cases, you can
select the desired language here.
Subtitle
2)
(refer to table)
SubTit1
eng
Subtitle 1 is displayed (preferred).
(are displayed when trans-
SubTit2
Subtitle 2 is displayed instead of subtitle 1.
mitted and selected
out of table).
off
Subtitle disable.
Actually transmitted languages/subtitles are marked with present. SubTit1 is preferred displayed.
eng
ger/deu
fra/fre
est
kor
ara
gre
lit
lat
pol
por
jpn/jap
cze/tr2
hun
rum/rom
dut/net
rus
chi/mdr
nor
ita
spa
swe/sve
den/dan
fin/suo
2)
Table subtitle / language
