Wisi OH 88 H, Operating Instructions Manual

Page: 14 / 24

- 14 -
* NITGen extern: Transfer over OH 50
1. set OH 50 to standby mode
2. insert USB stick with the NIT
3. select NIT transfer
4. select modul
5. select modul channel
6. select NIT file
** License: Transfer license for NIT
1. OH 50 Standby
2. insert USB stick with license
3. select LIC transfer
4. select license file
Attention:
The displaying of the license runtime only works if the input signal is connected.
The time information will be extracted from the input signal.
Bedienung / Instructions
NITconf NIT configuration
NITGen NIT off ......... no own NIT will be generated,
an existing NIT will be passed through
intern
.......... the NIT will be automatically generated
from the module settings (standard)
extern* .........external generated (ex. over USB) NIT will be
inserted. The menu will only displayed if a
license is available and the NIT is transferred
to the module
NITOrg
............................. The parameters TS-ID and Org-NW-ID of the
input signal are displayed. These are needed to
create an external NIT.
NETname ......................... Network name can be edited
NET-ID ............................. Network-ID from the NIT can be edited
ONET-ID
.......................... Original-Network-ID from the NIT
can edited
TS-ID ............................... TS-ID can be edited, if 0xFFFF has been set the
TS-ID will be automatically detected
PAT Mon on The PAT monitoring monitors the changes
off of the version information in the PAT.
In case of a change the PID filter at the
output modulator will be updated (select mode).
In addition, the changes will be adopted for the
decryption. This is in particular needed in the
dynamic change of the transport stream for
example at regional switching.
License** 30 days ........shows the remaining days of the external NIT
and the NIT license.