- 6 -
OH 66 module commissioning procedure:
(Parameter menu see on the following pages)
1.
Connect CVBS or SDI signal to BNC connector of channel A or channel B.
Connect Audio signal to stereo jack socket 3.5 mm of channel A or channel B.
2.
Switch on the basic unit with OH 66.
3.
The status LED of channel A/B is flashing red -
Modulator starts.
4.
The status LED of channel A/B is flashing yellow -
MPEG Encoder starts.
5.
The status LED of channel A/B lights up green -
An input signal is detected.
Quick setup
6.
Select the channel, for setup, in the menu
Channel
.
7.
Select input signal type:
In-Para
:
In-Src
analog
(for analog A/V signals)
SDI
(for SDI signals)
8.
Select audio signal source if the SDI input is used:
In-Para
:
A-Src-L
DigGrp 1
(audio source left digital group 1)
In-Para
:
A-Src-R
DigGrp 2
(audio source right digital group 2)
9.
Select the content for encoding:
MPGPara:
Encode
A/V
(TV program with audio and video)
Audio
(Radio program only audio)
off
(Channel is inactive in TS)
10.
Set program name:
TS-Para
:
PgmName
Encoder Progr. A
(16 characters, selectable)
11.
Set provider name:
TS-Para: Provid.
WISI MPG Encoder (16 characters, selectable)
12.
Set network name:
NITPara
Network
WISI MPG Network (16 characters, selectable)
13.
Select the output modulation type:
Out-Para
:
ModType
DVB-C
DVB-T
ClrCarr
14.
Set the output frequency:
Out-Para
:
F-Out
474.00
(output frequency in MHz)
15.
For channel B, repeate setup from step 6.
16.
Quit module menu, to save parameters.
