Page 6
CHAMELEON
CHAMELEON GN40
Installation guide
Important information!
•
Operation of the GN 40 is only allowed while the fan unit is running.
•
The Chameleon module has a temperature sensor. If it is too hot, the
Chameleon stops running without a warning signal.
•
If the fan unit is running, the DC power unit works correctly
•
There is no guide rail for the rack needed, the GN 40 is able to be
installed directly on the fixture brackets
Changing the power supply:
•
Disconnect the AC an DC power cables and remove the power
supply unit
•
Set in the new power supply unit and connect the cables like it was
on the old one.
