- 4 -
Assembling the Chameleon modules in the GN 01
1.
Change the screws of the Chameleon module with the delivered screws (a)
2.
Put the Chameleon modules in the GN 01, and fix it with the front panel screws. Fix the back of
the Chameleons with the delivered grounding nuts (b, next side).
Ventilation of the chameleon-units
The ventilation is important to prevent over-heating of the Chameleon modules.
-
Ensure that the top-cover is mounted, and that there is free space at the rear side.
Important information!
-
Use the GN 01 only with the fans running.
-
30 cm free space is needed for ventilation.
-
The Chameleon module has an embedded temperature sensor.
If the Chameleon module is too hot, it stops running without a warning
signal.
Changing the power supplies
Disconnect the AC an DC Power cables and remove the power supply unit.
Mount the new power supply unit and reconnect the DC and AC cables.
a
