DVR-0031-1
User Guide
1. Overview
1) Camera Lens
2) Red Indicator Light
3) Blue Indicator Light
4) USB Port
5) Power On/Off Switch
6) Micro SD Card Slot
7) Power On/Off Button
2. Operation
>> Please make sure the camera is fully charged before using.
>> Please make sure the Micro SD Card is properly fitted into the Micro SD Card
Slot on your camera. The camera will not work without a Micro SD card.
>> Please make sure the Battery is securely fitted into the Battery Holder on the
remote controller.
>> Please make sure the Power On/Off Switch on the camera has been slid to
the “ON” side.
>> Please make sure the remote controller is pointed to the camera every time
you press the buttons.
>> Please make sure the insulating film is removed from the remote controller.
>> Camera is fully charged when both red and blue indicator lights are solid on.
1) POWER ON/OFF
(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Power off the camera by pressing the Power On/Off Button for 2 seconds.
The Red Indicator Light will go out.
(3) In standby mode, the camera will shut down automatically within 2 minutes if
no operation is done.
2) VIDEO RECORDING
(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Press the Video Record Button once to record video. The Red Indicator Light
will flash 3 times and then go out.
(3) Press the Video Button once again to stop video recording. The Red Indicator
Light will be solid on, indicating the camera is back to standby mode already.
3) CAMERA/STILL PHOTOGRAPHY
(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Press the Camera Button once to taka a photo. The Red Indicator Light will
flash once.
(3) The Red Indicator Light will be solid on after a photo is taken, indicating the
camera is back to standby mode.
4) AUDIO RECORDING
(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Press the Audio Button once to record audio. The Red indicator light will go
out. The Blue Indicator Light will flash 3 times and then go out.
(3) Press the Audio Record Button once again to stop audio recording. The Red
Indicator Light will be solid on, indicating the camera is back to standby mode
already.
5) MOTION DETECTION RECORDING
(1) Power on the camera by pressing the Power On/Off button for 10 seconds.
Both red and blue indicator lights will be turned on. Then the red indicator light
will flash once and be solid on. The blue indicator light will go out, indicating the
camera has entered into standby mode automatically.
(2) Press the Motion Detection Button once to enable the motion detection
mode. The Red and Blue Indicator Lights will flash 4 times and go out. The
camera will record video and audio automatically when a movement is detected.
(3) Press the Motion Detection Button once again to disable motion detection
function. Then the Red Indicator Light will be solid on, indicating the camera is
back to standby mode already.
6) VIDEO/PHOTO FILE UPLOADS
OPTION 1
(1) Connect the camera with the USB cable to a proper PC computer USB port.
(2) The camera will be recognized as a removable disk drive.
(3) All the files can be accessed in the DCIM folder.
OPTION 2
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Insert the card reader into a proper PC computer USB port.
(3) The Micro SD card will be recognized as a removable disk drive.
(4) All the files can be accessed in the DCIM folder.
7) DATE/TIME STAMP SETTING
OPTION 1
(1) Connect the camera with the USB cable to a proper PC computer USB port.
(2) Removable disk drive folder will appear.
(3) Click on the drive in the root directory and edit the time.txt file provided.
(4) Input the current date and time in the time.txt file with correct format:
Year-Month-Day Hour: Minute: Second. (For example: 2016-03-12 17:04:59).
Save this file.
(5) Restart the camera and the system will upgrade the program automatically.
OPTION 2
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Insert the card reader into a proper PC computer USB port.
(3) Removable disk drive folder will appear.
(4) Click on the drive in the root directory and edit the time.txt file provided.
(5) Input the current date and time in the file time.txt with the correct format:
Year-Month-Day Hour: Minute: Second. (For example: 2016-03-12 17:04:59).
Save this file.
(6) Restart the camera and the system will upgrade the program automatically.
8) CHARGING
(1) Connect the camera to a power outlet with the USB cable and the DC5V
charging adapter provided.
(2) During the charging process, the red and blue indicator lights will illuminate
then turn off every 50 seconds, afterwards the red one will turn on, then flash
slowly 14 times and go out.
(3) Camera is fully charged when both red and blue indicator lights will turn off.
(4) It will take about 2 hours to obtain a full charge.
(5) The camera can record videos for 1.5 hours continuously with a fully
charged battery.
8) Camera Button
9) Video Record Button
10) Motion Detection Button
11) Audio Record Button
12) Battery
13) Battery Holder
