c
In the <
address
> pane, provide the
necessary information.
d
In the <
port
> pane, provide necessary
information.
•
HTTP Port : Used to access the encoder
using the Internet browser, defaulted to 80.
•
VNP Port : Used to control the video signal transfer, defaulted to 4520.
e
Enter the password.
The default password is “
4321
”.
J
`
In the IP installer, you can use the initial password, “
4321
” to set IP Address, Subnet Mask,
Gateway, HTTP Port, VNP Port, IP type. After changing the network interface, for better security,
access the web viewer and change the password.
`
If you want to set the password, refer to “
Password setting
”.
f
Click [
ok
].
Manual network setup will be completed.
connectIng to the encoder From a shared local pc
1.
Run the IP Installer.
It will scan for connected encoders and display them as a list.
2.
Double-click an encoder to access.
The Internet browser starts and connects to the encoder.
M
`
Access to the encoder can also be gained by typing the encoder’s IP address in the address bar
of the Internet browser.
d
c
e
f
5
