English
_9
●
INST
ALLA
TION
PROTECTION OF CABLE FROM WATER
If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber
(available on the market) shall be used to protect from water.
1.
Connect power supply and BNC power source.
2.
Cover black sheath of the cable (Zone A), and ensure half of butyl rubber can cover the cable joint.
J
`
Poor water protection at the cable sheath may cause water leakage. Make sure to wrap tightly.
`
The water-proof butyl rubber is made of rubber that expands to twice the original length.
`
If you do not use cable joint, it must be covered with water-proof tape.
CONNECTING THE NVR
Use a 12V 0.5A power adpator to power each wireless camera. There is no need to connect cameras to NVR as it
is wireless AIO.
HDMI
VGA
WAN
CAUTION
RISK OF ELECTRI SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SER
VICEABLE
P
ARTS INSIDE. REFER SER
VICING TO QUALIFIED
SER
VICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALL
Y DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
