Wisen Innovation Technical Doc. No.2021
WiSen® Vision Unit - User Manual
www.wisencn.com
Page - 9 - of 12
1
4G Daughter Board
2
LED Board
3
LED Switch
4
Camera wire terminal
5
Buzzer
6
Buzzer Switch
7
ON/OFF Switch
5. Operation Procedures
5.1
．
System Deployment Notifications
1)
Location: The deployment location of a Vision Unit is usually determined by the desired monitoring or inspection
location;
2)
Clear notes must be taken so that the Laser Units direction of a monitored structure can be correctly interpreted;
3)
All the Serial Numbers of the Vision Unit must be recorded against their site references;
4)
All the node should have its antenna point upwards/downwards.
5.2
．
Deployment Procedures
1)
Open the box: Take the node out of the package and open its lid;
2)
Insert Battery: By default, a unit does not contain a D-Cell battery. Therefore the battery needs to be inserted.
Notice
: +ve and
–
ve orientation must be correct, otherwise, the internal circuit may be damaged;
3)
Antenna Installation: screw the antenna tightly onto the unit;
4)
Power On: switch on the Vision Unit by On/Off Switch. Now you should be able to see 3 LEDs flashing 3 times, this
means the node is on;
5)
Tighten the 4 Cap-Hex-Head screws of the lid to secure the enclosure IP rating;
6)
To validate the data/photo, please visit Wisen Visualisation Platform for further details.
