10
Installing the S90 in a Wall
(continued)
4.
Tape and spackle the seams
5.
After everything has been painted, slice
the paint along the edge of the foam plug
in the bass vent. Remove and discard
the foam.
a.
The foam plug is there simply to
protect the inside of the S90, and
particularly the woofers
themselves, from being splattered
with paint. Once that purpose has
been served, it needs to be
removed. A sharp utility knife can
be used to break any paint that
may have leaked into the area.
Making the S90 Connections
As with any system, you should make changes to the connections only when the
power is turned off to avoid any chance of inadvertently causing a problem (such
as a short-circuit).
We recommend using heavy-gauge speaker wire, the gauge will vary dependent on
your speaker run length. Please consult an authorized dealer to determine what
gauge would be best for your application.