WISDOM SERIES LS3m
WISDOMAUDIO.COM
6
Because of this shape, the sound (even at high frequencies) is distributed uniformly
across the width of the room from a driver that “looks” only less than an inch wide
acoustically. However, the sound is launched in a much more directional way vertically.
By minimizing early reflections from the ceiling and the floor, the clarity of the system is
greatly enhanced. This is heard in both tremendous musical detail and in much-
improved dialog intelligibility.
For more detailed information on planar magnetic drivers and the difference between
point source and line source speakers please visit wisdomaudio.com.
Unpacking and Installing the LS3m
Your new
Wisdom Audio Wisdom Series LS3m
in-wall speaker is relative compact, but
surprisingly massive compared to most installed speakers. Please exercise caution when
unpacking yourLS3mto ensure that you do not strain yourself from its (perhaps
unexpected) weight.
1.
Remove the torx screws from the hinged lid of the crate with the supplied torx
bit, which can be found in pouch on top of crate.
2.
Use the included cardboard template to trace the outline of the hole for the
speaker and carefully cut to the line.
3.
Push any insulation in the wall to the side. If there is no insulation in the wall,
loosely fill the stud bay with insulation to reduce cavity resonances and improve
performance.
4.
Using assistance to hold the speaker away from the wall, connect the speaker
cable to the + and – connectors on the rear of the speaker, paying attention to
proper polarity.
5.
Insert the speaker straight into the mounting opening. Use wood screws tighten
the speaker face to the mounting material.
