wiREVO HSH200 User Manual Preliminary version 0.4
4. Making calls
Make sure that your stereo headset is connected to your mobile phone.
Using a mobile phone
z
Using the phone’s keypad, dial the required number.
z
Send the call from the phone (Phone initiates the call).
z
The call will automatically transfer to the stereo headset. But for some mobile phones, you
must press Talk ( ) button to make the call transfer to the stereo headset. Please refer to
your phone’s user guide.
Using redialing the last call
z
With your stereo headset, you can re-dial the last call dialed or received.
z
Press Talk ( ) button and you can see the latest call numbers on the mobile phone.
z
Press Talk ( ) button again.
z
After you hear the short beep, you will hear the dialing tones from speaker.
! Note
Some mobile phone may re-dial the last call by pressing Talk ( ) button once.
Using voice dialing
z
To make calls using voice dialing with your stereo headset, your mobile phone needs to
support voice dialing and the feature must be activated.
z
Press and hold Talk ( ) button for 2 seconds and you can hear a short beep. Voice dial as
you normally would.
! Note
It is dependent on a mobile phone’s function and is possible when the mobile phone
supports Hands-free profile.
5. Transferring calls
z
To the Stereo Headset
Press Talk ( ) button during a phone call on the mobile phone.
z
To a Mobile Phone
Depends on the mobile phone‘s function. Refer to the user manual of a mobile phone.
6. Adjusting the volume
z
Press Volume Up ( ) button or Volume Down ( ) button to adjust the speaker volume during
a phone call.
Date: Jul. 13, 2006 Page 13 of 16
Hassnet Confidential Hassnet, Inc.